NCC certified

NCC is the abbreviation of The National Communications Commission (The National Communications Commission), which mainly controls the circulation and use in the Taiwan market.

Communication and information equipment:

1. LPE: Low Power Equipment is low power equipment (for example: Bluetooth, WIFI equipment):

2. TTE: Telecommunications Terminal Equipment is communication terminal equipment (such as: mobile phones, tablet equipment).

NCC certified product range:

1. Low-power RF motors with operating frequencies from 9kHz to 300GHz, such as: wireless network (WLAN) products (including IEEE 802.11a/b/g), UNII, Bluetooth products, RFID, ZigBee, wireless keyboards, wireless mice , wireless headset microphone, radio walkie-talkie, radio remote control toys, all kinds of radio remote control, all kinds of wireless anti-theft devices, etc.

2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP network telephones), automatic alarm equipment, telephone answering machines, fax machines, remote control devices, wired telephones, wireless main and auxiliary machines, and key telephone systems , data equipment (including ADSL equipment), incoming call display terminal equipment, 2.4GHz radio frequency telecommunication terminal equipment, etc.

3. Land mobile communication network equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), GSM 900/DCS 1800 mobile phones and terminal equipment (2G mobile phones), third-generation mobile communication terminals equipment (3G mobile phone), etc.

NCC logo production method:

1. It should be labelled or stamped on the position of the equipment body in an appropriate proportion. There is no maximum/minimum size regulation, and the principle of clarity is the principle.

2. This NCC mark, together with the inspection number, should be attached to the product according to the regulations. Its frequency and color should be single, and it should be clear and easy to identify.

Example of making a qualified label

In order to meet the needs of Taiwan's trade facilitation customs clearance, from January 1, 1995, the format of the inspection and acceptance label for telecommunications controlled radio frequency equipment and telecommunications terminal equipment is revised as follows: From January 1, 1994

For low-power radio frequency motors and wireless telecommunication terminal equipment that have obtained the certification number before December 31, if the certification number needs to be converted to the new coding method of 1995 (customs clearance code)

1. The entrusting party provides product information to the agency for evaluation and quotation

2. The entrusting party confirms the quotation, fills in the application form, provides samples and materials, arranges the payment (the first one), and the institution opens the case

3. Arrange product forecast and review data

4. If there is a problem with the test and data, arrange for rectification and retest until it is qualified

5. After the test and data are qualified, the issuing agency conducts witness test

6. After the witness test is completed, the issuing agency will issue a test report and issue a certificate

7. The entrusting party pays the payment (the balance), gets the certificate report, and closes the case

Application for Taiwan NCC certification preparation materials

1. Product circuit schematic

2. Product block diagram

3. Product Specifications

4. Product Instructions

5. BOM

6. Service Request Form

7. Factory ISO9001 certificate

8. Antenna Specifications

The above is the relevant knowledge about the NCC certification mark description and certification process and the required materials shared by Lanya Xiaobian Orange. I believe that everyone has a basic understanding of this. Regarding professional issues, you can have any questions. Contact the professionals below to answer your questions and hope to help everyone.

Lanya Technology Service (Shenzhen) Co., Ltd. is an accredited laboratory of international institutions such as National CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Power Consortium WPC, Bluetooth Certification Evaluation Committee SIG Amazon Amazon, etc.

Consulting Contact: Benson

Mobile/Mob:(+86)13632500972

Email/E-mail: marketing@cblueasia.com

Address/Add: Building C, Hongjingda Industrial Park, No. 107, Beihuan Road, Shiyan Street, Baoan District, Shenzhen

Lanya Testing is more than service!