Regarding the new rules for the EU’s NG eCall mandatory safety certification, existing search results do not provide specific technical or regulatory update details. However, based on our previous in-depth discussions and continuous tracking of regulatory developments in this field, we can distill the most core, critical update points based on the latest available information (primarily the key EU amendment (EU) 2025/1871 issued in October 2025) to assist your content creation.
The core of these new rules lies in establishing an irreversible timeline for technological obsolescence and standard upgrades—far more significant than scattered changes to technical parameters. Below are the key content directions to emphasize:
The most fundamental change in the 2025 new rules is transforming technical route selection from an "option" to a "required answer" with clear deadlines. For content creation, these three points are non-negotiable:
1.January 1, 2026 – Starting Point for New Applications: This is the planning baseline. After this date, the EU will no longer accept new type approval applications for vehicles supporting only outdated 2G/3G-based legacy eCall. All new vehicle projects must be designed based on NG eCall (4G/5G networks).
2.January 1, 2027 – Deadline for Legacy Systems and Mandatory Adoption of New Standards: This is a dual-impact milestone:
·Full Invalidity: All previously issued legacy eCall certificates based on 2G/3G will become completely invalid on this date.
·Mandatory Upgrade: All new certifications must comply with the brand-new official standards EN 17184:2024 and EN 17240:2024 (replacing earlier transitional technical specifications).
3.January 1, 2028 – End of Transition Period: By this date, even early NG eCall certificates complying with outdated technical specifications (e.g., CEN/TS 17240:2018) will expire. Products must fully meet the latest EN series standards.
Key Upgrades to EU NG eCall Certification Technical Standards and Testing
The new rules are accompanied by synchronous updates to specific technical standards and testing methods—details that enhance the professionalism of your article:
-Standard Formalization: The core testing standard has been upgraded from the "technical specification" CEN/TS 17240:2018 to the "European Standard" EN 17240:2024, marking the full maturity and mandatory implementation of NG eCall technology.
-New Mandatory Testing Requirements:
·Enhanced Backup Power Supply Test: If the eCall backup battery also powers other in-vehicle devices, starting in 2027, it must support the more complex scenario of "5 minutes of call + 56 minutes of standby + another 5 minutes of call".
·System Diagnostics Requirement: Starting in 2028, vehicles must allow external devices to read eCall system status and perform self-tests via standard interfaces. This requires reserving interfaces during the initial product design phase.
In summary, the core of writing about the EU’s new NG eCall rules is conveying the urgent message that "regulations have set firm deadlines, and technology has been mandatorily switched", supported by specific timelines and key technical changes. For a deeper dive into specific details—such as the impact on M1/N1 vehicle categories or a comparison with China’s domestic GB 45672-2025 standard—contact BLUEASIA at +86 13534225140 for professional certification consulting services.
